Shure PG81XLR Instrument Mic And Lead Pack - Great Accoustic Instrument Mic! RA request as discussed- 2x Titan 15A Serial 093B and 119B

Recognised as the industry’s leading microphone manufacturer, no other microphone company has the Shure depth of engineering horsepower and industry knowledge. For over 80 years Shure has been assisting the world’s finest communicators, entertainers, singers and musicians, to capture and communicate their sound to their audience.
Solid reliability and superior sound have made Shure microphones industry standards. Shure microphones deliver consistent vocal and instrument reproduction in any performance setting, which is why they have been legendary for so long.

SHURE PG81XLR INSTRUMENT MIC

Cardioid Condenser Microphone Equipped with a flat frequency response that delivers clear reproduction when used in sensitive acoustic instrument applications. Recommended Uses Orchestra/Strings Woodwinds Acoustic Guitar Acoustic Bass Bass Amp Piano/Organ Cymbals Stage Overhead Features: Flat frequency response is wide and uniform. Consistent sensitivity through frequency range. Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by AA battery or phantom power supply. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Microphone Type Condenser (electret bias) Polar Pattern Cardioid (unidirectional), symmetrical about axis Frequency Response 40 to 18,000 Hz Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at 1000 Hz) 600 ohms Sensitivity (at 1000 Hz) -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL Electromagnetic Hum Sensitivity -7 dB equivalent SPL in a 1 millioersted field (60 Hz) Switch Built-in On/Off switch Recommended Input Load Impedance 800 ohms minimum Output Clipping Level (1 kHz, 1 % THD) 2000 ohm load -13 dBV (0.22 V) (phantom) -17 dBV (0.14 V) (battery) Maximum SPL 2000 ohm load: 131 dB (phantom), 127 dB (battery) Self-Noise (Equivalent SPL) 20 dB typical, A-weighted Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level) 111 dB (phantom); 107 dB (battery) Signal-to-Noise Ratio 68 dB (IEC 651)* at 94 dB SPL Power Phantom Power Supply Voltage: 11 to 52 Vdc Current Drain: 2.0 mA max at 52 Vdc Maximum External Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc Reverse polarity protected to: 100 Vdc Battery Power Recommended: 1.5 V alkaline AA size (NEDA 15A) Life: up to 10,000 hours Connector Three pin professional audio connector (male XLR type) Case Steel and brass construction with black painted finish Environmental Conditions This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%. Weight Net: 250 g (8.8 oz) less battery Packaged: 880 g (1 lb 15 oz)

We accept Credit Card (Visa & MasterCard), PayPal, Direct Deposit/Internet Banking, Cheque/Money Order & Cash