Shopping Cart
Now in your cart:
0 item(s)
View Cart   |   Checkout
  Home Page PA Hire Drum Kit Setup Guide Specials Contact Us
 
 
  BRANDS  
 
CATEGORIES
Loading TreeView Menu


SHOWROOM DETAILS
Open:
 
MON-FRI 10am-5:30pm
SAT: 9:30am-5pm
SUN: CLOSED
 
Phone/Fax:
 
(03) 9720 4581
 
Factory:

 
2/55 Malvern St
Bayswater VIC 3153, Australia
 
Email:
 
sales@drumpower.com.au
 

View Larger Map
SERVICES
Drum Kit Setup Instructions
About Us
Contact Us
Drum Kit Hire
P.A. Hire
Services & Repairs
Tuition
Delivery Policy
Terms & Conditions
SECURE SHOPPING
Shop with peace of mind



Secured by
128-Bit SSL Strong Encryption
Product Details

Presonus Temblor T10 Active Subwoofer

Presonus

Presonus Temblor T10 Active Subwoofer

Presonus Temblor T10 Active Subwoofer Speaker with Cross Over

PRESONUS TEMBLOR T10 ACTIVE 170WRMS 10" STUDIO SUBWOOFER

 

The bottom line is great sound.

To hear what’s really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblorâ„¢ T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.

An ideal companion to Eris and Sceptre active reference monitors, the T10 complements full-range monitors without overshadowing them, extending the reach of your full-range system’s low end with a musical and natural approach.

Powerful and musical, Temblor features high-quality components and design that enable it to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot.

The Temblor T10 is an active subwoofer with a 10-inch glass-composite driver, built-in crossover, high-temperature voice coil, and damped rubber surround. Its cabinet features a front-firing, bass-reflex acoustic port and optimized, resonance-suppressing internal bracing. The enclosure has integrated rubber feet for stable placement.

In addition to outstanding accuracy and a frequency response that ranges from 20 Hz to 130 Hz, this combination of features enables the subwoofer to produce higher volume up to 113 dB SPL with less power than a sealed-box design. But make no mistake, the T10 has plenty of juice: 250 watts of Class AB power.

The result is a subwoofer that delivers accurate, tight low end and outperforms subs costing far more. With Temblor T10, you hear what the foundation of your mix really sounds like so you can produce your best mix from top to bottom.

Features:

Main components

  • 10-inch glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port


Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert and ground-lift switch


Power and safety

  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated, gravity-calibrated rubber feet for stable placement


Inputs and outputs

  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼” TRS outputs
  • XLR subwoofer output for connecting a second T10

 

Customize your system until it’s just right.


The T10 provides more user controls than any other subwoofer in its class, enabling seamless integration into your listening environment. The Temblor T10’s extensive user controls include input gain (-30 dB to +6 dB, continuously variable) and a continuously variable lowpass filter (50 Hz to 130 Hz) that let you create a seamless crossover transition between your full-range studio monitors and subwoofer for a more accurate listening environment.

A switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors, avoiding destructive cancellation and reinforcement in the T10’s upper range.

The result is a subwoofer that can be adjusted to perfectly complement not only our Sceptre CoActual and Eris active studio monitors but virtually any studio monitor.

The T10 also features a momentary footswitch (included) that bypasses the subwoofer, highpass filter, and Sub Out. This allows your audio source signal to pass directly through the Temblor T10 to the full-range studio monitors, making comparing your mix with or without sub frequencies quick and easy. This helps to ensure your mix will sound good on a wide variety of systems.

Of course, we didn’t forget the “small things” that can make a big difference: polarity invert and a ground-lift switch.

Versatile I/O works with any setup.

No other subwoofer anywhere close to the Temblor T10’s price range offers a comparable selection of inputs and outputs.

The Temblor T10 provides a choice of three input pairs: two sets of balanced inputs (XLR and ¼” TRS) and one pair of RCA unbalanced inputs. Pairs of inputs are provided in order to accept a stereo signal from your audio source.

When both of the balanced connections are in use, the TRS inputs will take precedence over the XLR inputs. The RCA inputs will sum into either balanced connection.

You get two pairs of balanced outputs: XLR and ¼” TRS. The full-range signal connected to the stereo inputs on the T10 is passed through to these outputs so you can connect them to your main left and right studio monitors. If the High Pass Filter switch is engaged, frequencies below 80 Hz are not sent from these outputs.

The T10 also has a balanced XLR output that sends the low-frequency signal from the lowpass filter to a second Temblor T10 for the ultimate in smooth low end.

Inputs

2- Balanced XLR
2- Balanced ¼” TRS
2- Unbalanced RCA

Outputs

2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced ¼” TRS (full range with 80 Hz HPF option)
1- Balanced XLR (Sub Out)

Performance

Frequency Response 20 Hz to 200 Hz
Low Pass Filter Frequency 50 to 130 Hz (variable)
Signal-to-Noise Ratio >98 dB
THD 0.019% @ power <160W
Amplifier Power 170W RMS
Power Consumption 230W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 10” glass-composite

Cabinet

Vinyl-laminated MDF

Physical

Width 12.60” (320 mm)
Depth 15.75” (400 mm)
Height 15.75” (400 mm)
Weight 39.46 lbs (17.9 kg)

 

 

 

 

 

 

Sign up for our newsletter:
 
Home Page   |   Warranty & Returns   |   Delivery Policy   |   About Us   |   Contact Us   |   Checkout

Privacy Policy   |   Terms of Service   |   Sitemap
AKG | Allen and Heath | Amplifier | Audio Technica | Behringer | Blackstar | Cheap Drum Kits | Cole Clark | Cymbals | Db Technologies | Drum Sets | ESP Guitars | Multitrack Recorders | Digital Recorders | Drum Accessories | drum kits | drum shop | Electronic Drums | Epiphone Guitars | LTD Guitars | Fostex | Gretsch | Guitar Accessories | Guitar Pack | Istanbul Cymbals | Mesa Boogie | Microphones | mixing consoles | PA systems | Presonus | Quest Engineering | Randall Amplifiers | RCF Speakers | Rode | Sabian | Sennheiser | Shure | Studio Recorders | Ufip | Warwick bass | Washburn | Wharfedale | Wuhan Cymbals | Zoom recorders| Digitech Guitar Effects | Ddrum Drumsets | Sonor Drums | Cymbals | Guitars

Canberra   |   Sydney   |   Melbourne   |   Brisbane   |   Perth   |   Adelaide   |   Hobart   |   Darwin


Copyright © 2009 - 2017 Drum Power Pty Ltd
Design and e-commerce solution provided by My Online Business.